c

    企业信息

    上海凯贤油墨印刷科技有限公司

  • 14
  • 公司认证: 营业执照未认证
  • 企业性质:
    成立时间:
  • 公司地址: 上海市 嘉定区 嘉定镇街道 上海嘉定区沪宜公路6106号
  • 姓名: 戴小姐
  • 认证: 手机未认证 身份证未认证 微信已绑定

    供应分类

    不锈钢金属油墨

  • 所属行业:丝印特印 丝印油墨颜料 金属油墨
  • 发布日期:2016-06-07
  • 阅读量:172
  • 价格:180.00 元/公斤 起
  • 产品规格:1公斤
  • 产品数量:1000.00 公斤
  • 包装说明:按订单
  • 发货地址:上海嘉定嘉定  
  • 关键词:不锈钢金属油墨,丝印不锈钢油墨

    不锈钢金属油墨详细内容

    喷漆面金属油墨的详细描述:
        
    具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及**擦之特点。 印刷:丝印移印均可。表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。 测试方法(*干燥后):1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油;2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色; 3、**:橡皮擦500g力水平来回擦500次。 使用方法: 1、使用前应充分搅拌,用后随时封闭;2、搅拌时加开油水10-15%,稀释到印刷粘度; 3、网板塞网时可用洗网水清洗; 4、不得与其它类型油墨混合使用。 注意事项:1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷;2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可; 3、环境温度过高,将会影响油墨原有质量;4、根据气候变化,请远离火源,阴暗环境下存放。喷漆面金属油墨
    Oles MPE Plating Ink
    MPE plating strengthening series ink characteristics : mainly usedin plating surface, enhanced surface, vacuum plating surface.PUsurface.UV surface and other materials, with a high color, highcolor, high covering power, high stability, high alcohol and rubcharacteristics. Printing: screen printing can be. Surface dryingand drying time: surface dry time natural volatile 5-10 minutes;work time within 24 hours. Dilution and cleaning: SV3 slow dry openwater, UVK1 ( printing open water) can be simultaneously used 718washing network water cleaning. Test method ( completely dry ): 1,3M gummed paper in the paintings of the surface of the ink, 45degree angle quickly pulled off the oil; 2, 99% of the purity ofindustrial alcohol, one kilogram of weight of cotton pack in theink surface, with a horizontal force pulling back and forth 200times without decolorization; 3: oak, wear resistance eraser 500gforce level brush back and forth 500 times. Usage: 1, use should befully stirred, use at any time after the closure; 2, add watermixing 10-15%, diluted to 3, screen printing viscosity; the plug isavailable when washing network water cleaning; 4, not with othertypes of ink mixing. Note: 1, the plastic material similar inappearance, but may be of different materials, customers need totry to determine its requirements, and then batch printing; 2, inthe printing process, such as drawing or spread out, maybe appropriate to add some slow dry plaster; 3, the ambienttemperature is too high, will affect the quality of the originalink; 4, according to climate change, please stay away from fire,dark environment storage.
    喷漆面金属油墨

    http://ts1234.cn.b2b168.com
    欢迎来到上海凯贤油墨印刷科技有限公司网站, 具体地址是上海市嘉定区嘉定镇街道上海嘉定区沪宜公路6106号,联系人是戴小姐。 主要经营PP免除理油墨,金属自干油墨,电镀表面油墨,镜面银油墨,UV表面油墨,玻璃油墨,陶瓷油墨,塑胶油墨,移印油墨,PET油墨,铭板PC油墨丝印油墨,783,718,719等相关溶剂,印刷辅料,丝印网板,移印网板,移印胶头。 单位注册资金未知。 我司为您提供油墨印刷的详细产品价格、产品图片等产品介绍信息,如果您对我公司的产品有兴趣,请在线留言或者来电咨询。